Omni Power 3 Bar MAP Sensor for Honda/Acura B/D/H/F Series - Civic 1988-2000, Integra 1990-2001 & S2000 2000-2005

The OMNI Power MAP-BDHF-3BR 3 Bar MAP Sensor provides manifold pressure data for compatible Honda and Acura engine-management systems. Applications include the Honda Civic, Acura Integra and Honda S2000, along with the manufacturer-listed models below.

Manifold pressure sensing for your engine-management setup

A manifold absolute pressure sensor measures intake manifold pressure so the ECU can use that information when calculating fuel delivery and ignition timing. This 3 bar sensor provides a linear 0-5V pressure signal and automatic temperature compensation.

The BDHF sensor family covers selected B, D, H and F-Series applications, plus additional applications listed by OMNI Power. Match the sensor to your vehicle's connector and mounting rather than relying on the engine-family name alone.

Manufacturer-listed vehicle fitment

• Honda Civic: 1988-2000
• Honda Accord: 1994-2002, including V6
• Honda CR-V: 1997-2001
• Honda Del Sol: 1993-1997
• Honda Odyssey: 1995-2001
• Honda Prelude: 1992-2001
• Honda S2000: 2000-2005
• Acura CL: 1997-1999
• Acura CL: 2001-2003 V6 Premium models only
• Acura Integra: 1990-2001
• Acura TL: 1999-2003

1990-1993 Acura Integra mounting note: OMNI Power specifies a 1994+ throttle body for correct sensor mounting. Confirm this requirement before ordering.

Features and specifications

• Sensor rating: 3 bar manifold absolute pressure
• Output: Linear 0-5V pressure signal
• Temperature compensation: Automatic
• Operating temperature: -40°F to 260°F
• Response time: 1 millisecond from 10% to 90% of the pressure scale
• Quality control: OMNI Power reports individual assembly, pressure testing and function checks in the USA
• Manufacturer part number: MAP-BDHF-3BR

Manufacturer family reference image shown. This listing is for the 3 bar MAP-BDHF-3BR sensor.

Installation and ECU calibration

ECU calibration is required. Use scaling specific to the MAP-BDHF-3BR 3 bar sensor and confirm your ECU or tuning solution supports it. Physical fitment does not configure the ECU for a different sensor rating. Have your tuner verify sensor scaling before operating the vehicle under boost.

Compare MAP sensors or browse our OMNI Power collection.

FREE Upgrade to 2-Day Shipping

Buying an upgraded MAP sensor from EDO Performance

Direct Omni Power supplier relationship: EDO Performance works directly with the manufacturer and offers fast worldwide shipping options, plus technical help from a performance tuning shop. Tell us your vehicle year, engine, ECU/tuning platform and target boost if you need assistance selecting a MAP sensor. Shipping costs and delivery speed are confirmed at checkout.

Common questions

Does installing this sensor automatically increase horsepower? No. It expands the supported pressure measurement range for a compatible, correctly calibrated ECU. Power changes depend on the rest of the engine setup and tune.

Is a 3 bar or 4 bar rating the same as boost pressure? No. A MAP sensor's bar rating specifies absolute pressure, which includes atmospheric pressure. At sea level, 3 bar absolute corresponds to approximately 29 psi gauge and 4 bar absolute to approximately 43.5 psi gauge.

Can I install it without tuning? Never assume so. Confirm the exact sensor scaling/transfer function with your tuner and verify pressure readings before operating under boost.