Motul 90 PA SAE 90 Mineral Limited Slip Differential Gear Oil 1L Pack of 4
Motul 90 PA is a mineral Extreme Pressure differential lubricant specially formulated for limited-slip differentials (LSD or LS) in demanding automotive and heavy-duty applications.
Designed for hypoid differentials with or without limited-slip systems, it provides strong lubrication and anti-wear protection under shock loads, heavy loads at low rotational speeds, and moderate loads at high rotational speeds.
Its specialized formulation helps reduce friction while minimizing noise, chatter, and grabbing in limited-slip differentials.
Motul 90 PA also provides anti-corrosion and anti-foam protection and is suitable for compatible racing cars, passenger vehicles, 4WD, AWD, 4x4, forestry, and construction vehicles.
Meets API GL-4, API GL-5, and MIL-L-2105D performance standards.
This package includes four 1-liter bottles, providing a total of 4 liters.
WHY THIS GEAR OIL:
Specially formulated for limited-slip differentials.
Suitable for hypoid differentials with or without LSD systems.
Extreme Pressure formulation provides strong anti-wear protection.
Helps reduce limited-slip differential noise and grabbing.
High lubricating properties help reduce internal friction.
Designed to perform under shock loads and heavy loads.
Suitable for low-speed/high-load and high-speed/moderate-load operation.
Provides anti-corrosion protection.
Provides anti-foam performance.
Suitable for compatible seals.
Meets API GL-4 requirements.
Meets API GL-5 requirements.
Meets MIL-L-2105D requirements.
BEST FOR:
Limited-slip differentials
LSD / LS differentials
Hypoid differentials
Differentials with limited-slip systems
Differentials without limited-slip systems where SAE 90 is specified
Racing vehicles
Passenger cars
4WD vehicles
AWD vehicles
4x4 vehicles
Forestry vehicles
Construction vehicles
Applications requiring SAE 90
Applications requiring API GL-4
Applications requiring API GL-5
Applications requiring MIL-L-2105D
KEY SPECIFICATIONS:
VISCOSITY GRADE: SAE 90
SAE STANDARD: SAE J306
PRODUCT TYPE: Limited Slip Differential Lubricant
APPLICATION: Differential / Transmission
FORMULATION: Mineral
LUBRICANT TYPE: Extreme Pressure
API STANDARDS: API GL-4, API GL-5
MILITARY STANDARD: MIL-L-2105D
DIFFERENTIAL COMPATIBILITY: Hypoid Differentials With or Without Limited Slip
LSD COMPATIBILITY: Yes
ANTI-WEAR PROTECTION: Yes
ANTI-CORROSION: Yes
ANTI-FOAM: Yes
DENSITY AT 20°C: 0.896
KINEMATIC VISCOSITY AT 40°C: 140.0 mm²/s
KINEMATIC VISCOSITY AT 100°C: 14.5 mm²/s
VISCOSITY INDEX: 102
POUR POINT: -24°C / -11°F
FLASH POINT: 212°C / 414°F
CONTAINER SIZE: 1 Liter / Approximately 33.81 US Fl Oz Each
PACKAGE QUANTITY: 4 Bottles
TOTAL VOLUME: 4 Liters / Approximately 135.26 US Fl Oz / 4.23 US Quarts / 1.06 US Gallons
FITMENT AND COMPATIBILITY NOTE:
Motul 90 PA is intended for compatible hypoid differentials with or without limited-slip systems requiring SAE 90 gear lubricant and the applicable API or MIL specifications.
Compatibility should be determined by the exact viscosity and lubricant specification required by the vehicle or differential manufacturer.
Important BMW Note: For BMW rear axles equipped with a limited-slip differential, Motul specifies MOTUL HYPO SYNT LS 75W-140 instead of Motul 90 PA.
Always verify the vehicle owner's manual before use.
IMPORTANT NOTES:
Do not select differential lubricant based only on the presence of an LSD system. Verify the required SAE viscosity and API specification.
Oil-change intervals should follow the vehicle or differential manufacturer's recommendations and be adjusted according to operating conditions.
Not recommended for BMW limited-slip rear axle applications where MOTUL HYPO SYNT LS 75W-140 is specified.
WHAT YOU RECEIVE:
4 x Motul 90 PA SAE 90 Mineral Limited Slip Differential Lubricant, 1 Liter Bottles