Motul 8100 Eco-Clean 0W-20 100% Synthetic Fuel Economy Engine Oil 5L Pack of 3

Motul 8100 Eco-Clean 0W-20 is a 100% synthetic Fuel Economy Mid-SAPS engine oil developed for modern gasoline and diesel engines requiring a low-viscosity SAE 0W-20 lubricant with advanced emissions-system compatibility.

It is designed for compatible modern engines, including applications equipped with catalytic converters, Gasoline Particulate Filters (GPF), and Diesel Particulate Filters (DPF).

The formulation meets ACEA C5, ACEA C6, API SP, and ILSAC GF-6A performance requirements and is suitable for compatible BMW, Mercedes-Benz, Opel/Vauxhall, Jaguar, Ford, Fiat, and Chrysler applications where the listed specification is required.

This package includes three 5-liter containers, providing a total of 15 liters for vehicle maintenance, workshop service, fleet use, and repeated oil changes.

WHY THIS OIL:

The advanced low-friction SAE 0W-20 formulation is engineered to reduce mechanical drag and support improved fuel economy while maintaining strong engine protection.

Excellent low-temperature fluidity promotes rapid oil circulation, quick oil-pressure build-up, faster warm-up, and improved cold-start lubrication.

The Mid-SAPS formulation controls sulfated ash, phosphorus, and sulfur content to help protect modern emissions after-treatment systems including DPF and GPF units.

ACEA C5 and C6 performance supports modern low-viscosity engines requiring reduced friction while maintaining wear protection, oxidation resistance, deposit control, and emissions-system compatibility.

API SP and ILSAC GF-6A performance supports modern gasoline engines requiring protection against oxidation, deposits, timing-chain wear, and Low Speed Pre-Ignition (LSPI).

BEST FOR:

Modern gasoline engines

Modern diesel engines

Turbocharged engines

Naturally aspirated engines

Direct-injection engines

Vehicles equipped with DPF

Vehicles equipped with GPF

Vehicles equipped with catalytic converters

Applications requiring SAE 0W-20

Applications requiring ACEA C5

Applications requiring ACEA C6

Applications requiring API SP

Applications requiring ILSAC GF-6A

Compatible BMW applications requiring BMW Longlife-17 FE+

Compatible Mercedes-Benz applications requiring MB 229.71 or MB 229.72

Compatible Jaguar applications requiring STJLR.03.5006

Compatible Opel/Vauxhall applications requiring OV 040 1547-A20

KEY SPECIFICATIONS:

VISCOSITY GRADE: SAE 0W-20

STANDARDS: ACEA C5, ACEA C6, API SP, ILSAC GF-6A

OEM APPROVALS: BMW Longlife-17 FE+, Mercedes-Benz MB-Approval 229.71, Mercedes-Benz MB-Approval 229.72, Opel/Vauxhall OV 040 1547-A20, Jaguar STJLR.03.5006

OEM PERFORMANCES: Chrysler MS-12145, Fiat 9.55535-GSX, Fiat 9.55535-DSX, Ford WSS-M2C947-B1, Ford WSS-M2C962-A1

OIL TYPE: 100% Synthetic Fuel Economy Mid-SAPS Engine Oil

TYPICAL PROPERTIES: Density at 20°C: 0.837, Kinematic Viscosity at 40°C: 41 mm²/s, Kinematic Viscosity at 100°C: 8 mm²/s, HTHS Viscosity at 150°C: 3.0 mPa·s, Viscosity Index: 177, Pour Point: -48°C / -54°F, Sulfated Ash: 0.77%, TBN: 8 mg KOH/g, Flash Point: 220°C / 428°F

EMISSIONS SYSTEM COMPATIBILITY: Catalytic Converter, GPF, and DPF Compatible in Approved Applications

PERFORMANCE FEATURES: Fuel Economy, low-friction operation, rapid cold-start lubrication, fast oil-pressure build-up, Mid-SAPS emissions protection, oxidation resistance, wear protection, deposit control, and LSPI protection

CONTAINER SIZE: 5 Liters / Approximately 5.28 US Quarts Each

PACKAGE QUANTITY: 3 Containers

TOTAL VOLUME: 15 Liters / Approximately 15.85 US Quarts / 3.96 US Gallons

FITMENT AND COMPATIBILITY NOTE:

Use only where SAE 0W-20 and the applicable ACEA C5, ACEA C6, API SP, ILSAC GF-6A, or listed OEM specification are permitted.

The listed manufacturer approvals do not make this oil suitable for every model from those manufacturers. Verify the exact vehicle, model year, engine, required viscosity, OEM approval, emissions equipment, oil capacity, and service interval before use.

This is a specialized low-viscosity Fuel Economy lubricant and may not be suitable for engines designed for higher-viscosity oils.

IMPORTANT NOTES:

Follow the vehicle manufacturer’s recommended oil-change interval and adjust it for severe service, repeated short trips, high temperatures, extended idling, towing, or other demanding conditions.

For applications requiring ACEA C5 or C6 performance, avoid mixing with oils that do not meet the required specification when maintaining full lubricant performance is important.

A complete oil and filter change is preferred when switching from an unknown or incompatible lubricant.

WHAT YOU RECEIVE:

3 x Motul 8100 Eco-Clean 0W-20 100% Synthetic Engine Oil, 5 Liter Containers

Total Quantity: 15 Liters

High Performance 100% Synthetic "Fuel Economy" lubricant specially formulated for OEMs requiring engine oil with very low HTHS viscosity (High Temperature High Shear) ≥ 2.6 mPa.s. and "Mid SAPS" with reduced content of Sulfated Ash (≤ 0.8%), Phosphorus (0.07% ≤ x ≤ 0.09%) and Sulfur (≤ 0.3%).
Suitable for latest generation Gasoline and Diesel engines meeting Euro 4, 5 and 6 emission standards, when a lubricant of both viscosity grade 20 and "Fuel Economy" is required: ACEA C5, ACEA C6, API SP and/or ILSAC GF-6a Plus standards.
Suitable for Catalytic Converters, Gasoline Particulate Filter (GPF) and Diesel Particulate Filter (DPF).
Some engines are not designed to use this type of lubricant, before use, consult the maintenance manual for your vehicle.

Fitment: