Motul 300V Competition 10W-40 100% Synthetic Ester Core Racing Engine Oil 2L
Motul 300V Competition 10W-40 is a 100% synthetic high-performance racing engine oil featuring advanced ESTER Core Technology.
Developed for racing gasoline and diesel engines, it is suitable for naturally aspirated, turbocharged, and supercharged engines equipped with direct injection, indirect injection, or carburetion.
The SAE 10W-40 viscosity is designed to provide stable oil pressure, strong oil-film protection, rapid engine response, and reliable lubrication across a wide range of RPM and operating temperatures.
It is ideal for tuned and high-performance engines operating under severe conditions and is compatible with gasoline, diesel, and compatible biofuels including ethanol.
This package includes one 2-liter container.
WHY THIS OIL:
100% synthetic ESTER Core racing formulation developed for demanding motorsport applications.
Friction-reduction technology supports maximum power and torque output throughout the RPM range.
High shear stability helps maintain a strong oil film under extreme engine loads.
Excellent oil-film adhesion supports rapid engine RPM response.
Fast oil-pressure buildup helps provide protection during startup and demanding operation.
Strong oxidation resistance supports longer oil performance under extreme temperatures.
Low volatility helps control oil consumption and evaporation.
High detergency helps maintain improved engine cleanliness.
Provides LSPI protection for compatible performance engines.
Compatible with alcohol-based fuels including ethanol up to E85.
Compatible with particulate filters requiring a reduced-SAPS lubricant.
BEST FOR:
Circuit racing
Rally
GT racing
Drag racing
Drift cars
Endurance racing
Hill climbs
Historic racing engines
Track days
Tuned performance vehicles
Naturally aspirated racing engines
Turbocharged racing engines
Supercharged racing engines
Gasoline racing engines
Diesel racing engines
Engines requiring compatible SAE 10W-40 racing oil
KEY SPECIFICATIONS:
VISCOSITY GRADE: SAE 10W-40
PRODUCT TYPE: Car Racing Engine Oil
PRODUCT LINE: Motul 300V Competition
FORMULATION: 100% Synthetic
TECHNOLOGY: ESTER Core Technology
ENGINE TYPE: 4-Stroke
STANDARDS: Above Existing Standards
ENGINE COMPATIBILITY: Naturally Aspirated, Turbocharged, and Supercharged
FUEL COMPATIBILITY: Gasoline, Diesel, and Biofuels Including Ethanol up to E85
LSPI PROTECTION: Yes
PARTICULATE FILTER COMPATIBILITY: Yes, for Compatible Applications Requiring Reduced SAPS
SULFATED ASH: 0.91% Weight
TBN: 8.1 mg KOH/g
DENSITY AT 20°C: 0.857
KINEMATIC VISCOSITY AT 40°C: 89.7 mm²/s
KINEMATIC VISCOSITY AT 100°C: 13.8 mm²/s
HTHS VISCOSITY AT 150°C: 4.3 mPa·s
VISCOSITY INDEX: 157
POUR POINT: -24°C / Approximately -11°F
FLASH POINT: 228°C / Approximately 442°F
CONTAINER SIZE: 2 Liters / Approximately 2.11 US Quarts
PACKAGE QUANTITY: 1 Container
TOTAL VOLUME: 2 Liters / Approximately 2.11 US Quarts / 0.53 US Gallons
FITMENT AND COMPATIBILITY NOTE:
Motul 300V Competition 10W-40 is designed primarily for racing, tuned, and high-performance engines operating under severe conditions.
The 300V Competition range is particularly suited to applications such as Rally, GT racing, track use, and historic or rebuilt racing engines where stable oil pressure and enhanced protection against wear are required.
Always select the correct viscosity according to the vehicle manufacturer's specification, engine-builder recommendation, or tuning-service provider.
IMPORTANT NOTES:
For optimal engine performance, avoid mixing with other synthetic or mineral lubricants.
Oil-change intervals should be determined according to the specific racing application, engine setup, operating conditions, fuel type, and recommendations from your tuner or engine builder.
Always verify that SAE 10W-40 is suitable for the intended engine.
WHAT YOU RECEIVE:
1 x Motul 300V Competition 10W-40 Racing Engine Oil, 2 Liter Container