Motul 300V Road Racing 10W-40 4T Synthetic Motorcycle Oil 4L Pack of 4
Motul 300V Road Racing 10W-40 is a 100% synthetic ester-based racing motorcycle oil developed for factory and high-performance production 4-stroke motorcycles.
Its advanced ESTER Core technology is engineered to maximize engine response and acceleration while maintaining strong oil-film adhesion, engine reliability, gearbox protection, and wet-clutch performance under demanding racing and high-performance riding conditions.
This package includes four 4-liter containers, providing a total of 16 liters for race teams, track riders, performance workshops, motorcycle dealerships, and repeated service applications.
WHY THIS OIL:
The advanced ester-based formulation provides excellent oil-film adherence to protect highly loaded engine and transmission components during high engine speeds, elevated temperatures, and severe operating conditions.
Low internal friction supports increased engine response, stronger acceleration, and efficient power delivery.
The formulation can provide up to a 1.3% horsepower increase while maintaining wet-clutch performance under controlled test conditions.
Outstanding gearbox protection is supported by an advanced anti-wear additive package, achieving an FZG Failure Load Stage greater than 14.
Strong shear stability helps maintain consistent viscosity and stable oil pressure under changing engine speeds, temperatures, and racing loads.
BEST FOR:
Factory and high-performance production 4-stroke motorcycles
Road racing, circuit racing, and track-day motorcycles
Superbike, Supersport, and high-revving sportbike engines
Motorcycles with integrated gearboxes
Motorcycles equipped with wet clutches
Compatible ATVs, UTVs, and side-by-side vehicles
Compatible personal watercraft requiring an appropriate 4-stroke racing lubricant
Race teams and workshops requiring a 16-liter package
KEY SPECIFICATIONS:
VISCOSITY GRADE: SAE 10W-40
STANDARDS: Above existing motorsport standards, Wet-clutch compatibility tested according to JASO T903:2023, MA2 level
TYPICAL PROPERTIES: Green fluorescent color, Density at 20°C 0.862, Kinematic Viscosity at 40°C 76.9 mm²/s, Kinematic Viscosity at 100°C 13.1 mm²/s, HTHS Viscosity at 150°C 4.2 mPa·s, Viscosity Index 173, Pour Point -48°C / -54°F, Flash Point 234°C / 453°F, TBN 8.4 mg KOH/g
OEM APPROVALS AND PERFORMANCES: ESTER Core technology, up to 1.3% horsepower increase, JASO MA2 wet-clutch compatibility, FZG gear protection above FLS 14, stable oil pressure, high oil-film adherence, anti-wear protection, and racing-level engine response
OIL TYPE: 100% Synthetic Ester-Based Racing Motorcycle Oil
ENGINE TYPE: 4-Stroke Motorcycle Engines
CLUTCH COMPATIBILITY: Wet-Clutch Compatible
GEARBOX COMPATIBILITY: Motorcycles With or Without Integrated Gearboxes
CONTAINER SIZE: 4 Liters / Approximately 4.23 US Quarts
PACKAGE QUANTITY: 4 Containers
TOTAL VOLUME: 16 Liters / Approximately 4.23 US Gallons
FITMENT AND COMPATIBILITY NOTE:
Use only where SAE 10W-40 motorcycle engine oil is appropriate for the engine, gearbox, clutch system, and operating conditions.
Verify the required viscosity, oil capacity, clutch specification, manufacturer requirements, and service interval before use.
This product is primarily developed for racing and high-performance use. It exceeds existing motorsport performance standards and has been tested for JASO MA2 wet-clutch compatibility, but compatibility must still be confirmed for the exact motorcycle or powersports application.
Do not use in applications requiring a different viscosity or specialized lubricant specification.
IMPORTANT NOTES:
For optimum engine, gearbox, and clutch performance, avoid mixing this product with other synthetic or mineral lubricants.
Oil-change intervals should be based on operating conditions, race schedule, engine preparation, fuel dilution, temperature exposure, and engine-builder recommendations.
Competition and track use generally require more frequent oil changes and inspections than normal street riding.
Do not use in 2-stroke engines.
WHAT YOU RECEIVE:
4 x Motul 300V Road Racing 10W-40 4T Synthetic Motorcycle Oil, 4 Liter Containers
Total Quantity: 16 Liters
SPECIFICATION:
| APPLICATION: | 300V - COMPETITION, RACING - FACTORY LINE |
| ENGINE TYPE | 4-STROKE |
| JASO STANDARDS | JASO - |
| OEM APPROVALS | ABOVE EXISTING STANDARDS |
| PRODUCT RANGE: | MOTORCYCLE |
| PRODUCT TYPE: | 300V |
| QUALITY | 100% SYNTHETIC |
| TITLE | MOTUL 300V FL ROAD RACING 10W40 100% SYNTHETIC 4STROKE 4L ENGINE MOTOR OIL |
| VISCOSITY | 10W-40 |