Price: $ 93.04
Eliminate cooling failures caused by water.
Evans Waterless Coolants high boiling point eliminates pump impeller cavitation. It remains a liquid under conditions where water would boil.
The absence of water from the cooling system eliminates the cause of corrosion, Evans Waterless Coolants are safe for use with all metals.
No electrolysis. Evans Waterless Coolants are non-conductive. Maximize boil-over protection
Evans Waterless Coolants boil at 375F, Evans Coolants wont boil over in hot weather, heavy loads, high altitude, or high power output.
Evans Waterless Coolants instantly condense back to liquid state, providing constant liquid to metal contact, keeping metal temperatures under control. Increase power output and fuel efficiency.
Evans Waterless Coolants allow most engines to safely operate at a higher temperature. Engines can be safely tuned for more power or better fuel efficiency.
When trapped heat is eliminated from the cooling system non-computer regulatd engines can operate at higher temperature increasing engine efficiency. Provide lifetime cooling performance and engine protection.
Evans Coolants are non-corrosive with stable additives, no need to change the coolant or replace additives.
Cooling effectiveness and corrosion protection continue for the life of the engine. Traditional water-based antifreeze must be flushed and changed at regular intervals.
Reduced operating pressure eliminates stress and protects engine cooling components, hoses, and gaskets. Cavitation erosion and electrolysis are also eliminated.
The additives in Evans Waterless Coolants are stable. No SCAs are needed for light duty or heavy duty diesel engines. Safer for handling and the environment.
Evans Waterless Coolants are essentially non-toxic.
Evans is safer to handle during installation and engine maintenance.
Lifetime coolant helps preserve natural resources and reduce hazardous waste.
Boils 375F @0psi
Viscosity 2.3cp @ 212F
Surface Tension 44dyn/cm
Engineered specifically to purge the cooling system before installing new waterless coolant Seeks out old coolant and water that remain after draining existing antifreeze/water mixture from an engine Especially important...
Evans High Performance Waterless Coolant is specifically designed for all modern, classic, vintage gasoline engines, light duty diesels, LP and CNG vehicles Evans Waterless Coolants have a boiling point above...
Make The Conversion to Waterless Coolant More Effective ! Evans waterless Heavy Duty Coolant boils at 375 F. In use, it features a huge separation between the operating temperature...
$ 196.08 $ 229.75
Make The Conversion to Waterless Coolant More Effective ! Evans High Performance Coolant combines the benefits of Evans NPG+ and NPGR. NPG+c provides superior cooling protection for all gasoline...