Motul 8100 ECO-LITE GEN3 0W-20 Full Synthetic Fuel Economy Engine Oil 5 Liter
Motul 8100 ECO-LITE 0W-20 is a 100% synthetic fuel economy engine oil designed for recent gasoline engines, including naturally aspirated or turbocharged, direct-injection or indirect-injection applications requiring a low-friction SAE 0W-20 lubricant.
The low-viscosity formulation supports rapid cold-start circulation, faster oil-pressure buildup, reduced internal engine friction, and efficient operating-temperature response. It also provides modern protection against wear, oxidation, deposits, sludge formation, and low-speed pre-ignition in turbocharged direct-injection engines.
It is compatible with catalytic converters and suitable for engines requiring API SQ-RC, ILSAC GF-7A, or GM dexos1 GEN3 performance.
WHY THIS OIL:
The API SQ-RC Resource Conserving formulation provides enhanced protection against oxidation, deposits, engine wear, cold-temperature performance loss, and LSPI throughout the lubricant service life.
The ILSAC GF-7A performance standard supports improved fuel economy, piston and ring cleanliness, seal compatibility, timing-chain protection, emissions-system compatibility, and durability in modern gasoline engines.
Its SAE 0W-20 viscosity reduces hydrodynamic friction, especially while the engine is cold, helping improve fuel efficiency while allowing the oil to circulate quickly through critical engine components.
The GM dexos1 GEN3 approval supports high-temperature stability, sludge resistance, engine durability, and protection for compatible General Motors gasoline engines.
The formulation is compatible with applicable gasoline, E85 ethanol blends, LPG, and CNG applications where the required oil specifications match.
BEST FOR:
Recent gasoline engines requiring SAE 0W-20
Naturally aspirated and turbocharged engines
Direct-injection and indirect-injection gasoline engines
Vehicles requiring API SQ-RC or ILSAC GF-7A
Compatible General Motors vehicles requiring GM dexos1 GEN3
Compatible Acura, Honda, Hyundai, Infiniti, Kia, Lexus, Mazda, Mitsubishi, Nissan, Subaru, Suzuki, and Toyota applications
Drivers seeking rapid cold-start lubrication, LSPI protection, and improved fuel economy
KEY SPECIFICATIONS:
VISCOSITY GRADE: SAE 0W-20
STANDARDS: API SERVICE SQ-RC, ILSAC GF-7A
TYPICAL PROPERTIES: Density at 20°C 0.842, KV at 40°C 45.2 mm²/s, KV at 100°C 8.4 mm²/s, HTHS at 150°C 2.6 mPa.s, Viscosity Index 162, Pour Point -42°C / -44°F, Flash Point 223°C / 433°F, Sulfated Ash 0.84%, TBN 8.40 mg KOH/g
OEM APPROVALS AND PERFORMANCES: General Motors GM dexos1 GEN3, Chrysler MS 6395, Fiat 9.55535-CR1, Ford WSS-M2C947-A, Ford WSS-M2C947-B1, Ford WSS-M2C962-A1
OIL TYPE: 100% Synthetic Fuel Economy Engine Oil
ENGINE TYPE: 4-Stroke Gasoline Engines
CONTAINER SIZE: 5 Liters
FITMENT AND COMPATIBILITY NOTE:
Use only in gasoline engines specifically requiring SAE 0W-20 with a performance level compatible with API SQ-RC, ILSAC GF-7A, GM dexos1 GEN3, or another listed manufacturer specification.
This low-viscosity oil may not be suitable for engines designed for thicker viscosity grades or different emissions-related specifications. Always confirm the required viscosity, approval, oil capacity, and service interval before use.
Vehicle compatibility can vary by model, engine, production year, market, and operating conditions. Do not select the oil solely by vehicle manufacturer.
IMPORTANT NOTES:
Drain intervals should follow the vehicle maintenance schedule and be adjusted for driving conditions, fuel quality, operating temperature, modifications, and severe service.
This oil can be mixed with compatible synthetic or mineral engine oils when necessary, although a complete oil and filter change is preferred for consistent lubricant performance.
Do not substitute this oil for 0W-16, 5W-20, 5W-30, or another viscosity unless the vehicle documentation specifically permits SAE 0W-20.
WHAT YOU RECEIVE:
1 x Motul 8100 ECO-LITE 0W-20 Full Synthetic Engine Oil, 5 Liter